post

Coilover, Factory Vogtland BMW 1er F20, F21 (1K2,1K4) 2WD 968710

Coilover, Factory Vogtland BMW 1er F20, F21 (1K2,1K4) 2WD 968710

Coilover, Factory Vogtland BMW 1er F20, F21 (1K2,1K4) 2WD 968710
Coilover, Factory Vogtland BMW 1er F20, F21 (1K2,1K4) 2WD 968710. The description of this item has been automatically translated. Suitable for the following vehicles. Vehicle: BMW 1 Series F20, F21 2WD Type: 1K2, 1K4 114i, 114d, 116i, 1116d, 118i, 118d, 120d Construction year: from 09.11 -> Lowering: VA: approx. 30-55 mm, HA: approx. Axle loads: VA: up to 920 kg, HA: 1160 kg Notes: 15, 24, 62. Are you not sure whether the chassis fits your vehicle? The coilover suspension from VOGTLAND offers individual lowering with a sporty preset Damper characteristics. This quality product only uses special high-performance 2-pipe dampers used with a low gas pressure system and first-class corrosion protection. In conjunction with the individual housing length tailored to your vehicle type, Make full use of the available spring travel for your own personal depth adjustment. And all of this in the tested area. You don’t even have to forego the required remaining spring travel. The sporty, comfortable set-up enables top road holding and excellent driving characteristics. Depending on the vehicle brand, the permitted adjustment range is up to 80 mm and guarantees a sporty look. 2-pipe gas pressure damper. The amount of lowering is reduced by the amount of the factory lowering. The measure of the lowering will be reduced by the measure of the sport suspension. Wedge shape: The lowering of the front axle depends on the equipment and engine variant. Wedge form: The lowering of the front axle depends on the equipment and weight of the engine. From chassis number 21234. As of chassis number: 21234. For fine-tuning, please use Mercedes-Benz spring plate pads, which are available in different thicknesses (8 – 23 mm). For fine tuning, please refer to the Daimler Benz spring insolators available in different heights (8-23 mm). Reinforced version (heavy duty) for vehicles with full equipment and more than 4 cylinders. Heavy duty for models with full equipment and more than 4 cylinders. For vehicles with a load-dependent brake force distributor, a demonstration is required despite ABE. A presentation is necessary despite ABE for vehicles with a load depending brake power distributor. Not for vehicles with level control/air suspension. Without self-leveling / air suspension. For vehicles with Tiptronic, Multitronic, increased lowering possible. Additional lowering may occur on vehicles equipped with automatic transmissions. Only for vehicles with full equipment. With the XR3i there is no additional lowering, just tighter tuning. XR3i does not lower, only the adjustment becomes more sportive. For vehicles with 6 cylinders, e. Golf III VR6, it is recommended to convert to sports dampers, included in the VOGTLAND complete chassis. Vehicles with 6 cylinder engines require sport shocks. Not for: Break, Caravan, Tournament, T-model, Touring, Variant, Avant, Station Wagon, Traveler, (estate). Not for station wagons. As of ABE number 9138/2. Use spring plate with the number: 171412341A up to 8.79. Up to 8.79 please use spring cap number 171412341A. Not for all-wheel drive. Excludes 4 wheel drive. Modified spring plates [and possibly other parts] must be used on the front axle. Either the spring plate with the VW part number 1H0412341 (large) or 357412341 A (small). Volkswagen springs caps [and probably further Parts] might be necessary:?? 1H0412341 (big) or 357412341 A (small). Shortened sports shock absorbers required. These are already included in the VOGTLAND complete chassis. Shorter sport shocks are required. The VOGTLAND suspension kits are covered with these shocks. Not for series sports suspensions. Not suitable for serial or sport suspension. Only front axle springs, rear axle torsion bars (or standard spring element). Only front springs, torsion bars (or standard spring) on?? the rear axle. Rear axle springs only, front axle torsion bars (or standard spring element). Only rear springs, torsion bars (or standard spring) on?? the front axle. All wheel/tire combinations approved by the wheel testing centers can be used. The requirements in the wheel report or Wheel ABE must be adhered to, with the exception of the requirement for standard chassis. All wheel/tire combinations are allowed which are released by the wheel type testing institution. The conditions in the wheel approval have to be kept, except when suspension is required. With adjustable complete chassis, the damping forces can only be adjusted on the front axle when installed. At the VOGTLAND adjustable suspension kits only the shock valvings in the front are adjustable. Due to vehicle-specific tolerances, it may be possible that the stabilizer bar and drive shaft come into contact. For coilover kit: Item no. 968550000, stabilizer kit, without xenon. For complete chassis: elongated standard coupling rods (VW/Audi). Due to vehicle-specific tolerances a contact between the drive shaft and the anti-roll bar might occur. In such case it is required to install a modified anti-roll bar. For Coilover Sets use Order No. 968 550 000 (Anti-roll bar conversion set without Xenon headlights). For Suspension Kits use a longer steering rod from your VW/Audi dealer. VA/HA threaded spring struts (height adjustable). Height adjustable at the front and rear axle (threaded strut housings). VA/HA height adjustable VA threaded spring struts, RA springs with height adjustment plus. Height adjustable at the front and rear axle (front axle threaded housings, rear axle threaded spring perch and separate shocks). Only VA height adjustable, HA spring and shock absorber. Only height adjustable at the front axle (threaded strut housings), springs and shocks at the rear axle. Possibly with standard tires. May require the use of wheel spacers with equipment tires and wheels. The level control must be shut down. Self-leveling must be shut down. VA height-adjustable threaded spring strut, RA sports shock absorber (adjustment of the rear using a torsion bar). Height adjustable at the front (threaded strut housings), rear axle is adjustable with torsion spring adjustment. Damper adjustable when installed. Installed shocks can be adjusted when installed. Damper can only be adjusted when removed. Installed shocks cannot be adjusted when installed. The front direction indicators (§ 76/756 EC) must maintain a minimum height of 350 mm. Alfa part number: 46226968. The front turn lights (§76/756 EG), must be the min. Height from 350 mm. Production date 4/02 (piston rod thread visible), from 4/02 (piston rod thread covered). For vehicles manufactured before 04/02, the piston rod is fastened to the support bearing with an arched disk (piston rod threads visible). Models built after 04/02, piston rod threads not visible. Use only for vehicles with rear shock absorber mount M10 (1.0i, 1.2i, 1.7Di). Only for vehicles which have rear dampers mounted below with M10 (1.0i, 1.2i, 1.7Di). Use only for vehicles with rear shock absorber mount M14. (1.4i, 1.8i, 1.3CDTI, 1.7DTi, 1.7CDTi). Only for vehicles which have rear dampers mounted below with M14 (1.4i, 1.8i, 1.3CDTI, 1.7DTi, 1.7CDTi). VA shock absorber: complete shock absorber for item no. 960422, 960423, 966322, 966404, 966406, 966407, 969419, 969422, 969423, 960462. Front shock: complete suspension strut. Part number: 966404, 966406, 966407, 966322, 960422, 969423, 960423, 960462. VA shock absorber: strut cartridge. Dampers are only suitable for European vehicles. Damper only suitable for European cars. With a drive shaft diameter of more than 42. Tested lowering by approx. If the driveshaft diameter is greater than 42, mm the max. Approved lowering is reduced 15 mm. The internal distance on the front shock absorber (between the fastening straps) must be 27 mm. The inside distance between the mounting bracket of the front damper must be 27 mm. From chassis number Y-on the 10th Job. From chassis number Y on the 10th position. For vehicles with 50 mm shock absorbers. For cars with 50 mm suspension strut. For vehicles with 55 mm shock absorbers. For cars with 55 mm suspension strut. For vehicles built between 10.91 and 5.92, the upper mounting bearings BMW no. 31331090467 must be used. For cars built from October 1991 up to May 1992 the upper attachment must be replaced by BMW part number 31.331.090.467. Until 1998 (up to chassis number 8DX199999). Up to 1998 models (up to VIN: 8DX199999). Coupling rods 968220, 968221 required for lowering over 40 mm. Steering rod 968220, 968221 for lowering above 40mm nessecary. After the chassis has been installed, there is freedom of movement Check the tires on the VA shock absorber min. 5 mm and if necessary. By means of using tested spacers. After mounting the clearance between Wheel and Suspension Strut must be at least 5mm. If it is smaller you have to use wheel spacers. Audi: Year of manufacture up to 4.00, VW: Year of manufacture up to 9.99. Audi: Model year up to 4.00, VW: Model year up to 9.99. Audi: Year of manufacture from 5.00, VW: Year of manufacture from 10.99. Audi: Model year after 5.00, VW: Model year after 10.99. Without 16V, VA mounting hole distance 52 mm. Without 16V, front bracket bolt distance 52 mm. Without 16V, VA mounting hole distance 54 mm. Without 16V, front bracket bolt distance 54 mm. Without Rallye, TD, Genty, CT, CTI, GTI. Year of manufacture up to 8.04, without 2.0T, 3.0V6 CDTi, without IDS. Model year up to 08.04, without 2.0T, 3.0V6 CDTI, without IDS. From year 8.04, without 2.0T, 3.0V6 CDTi, without IDS. Model year after 08.04, without 2.0T, 3.0V6 CDTI, without IDS. For vehicles with eyes attached to the HA. For models with eye mounting at the rear. For vehicles with fork attachment on the rear. For models with fork mounting at the rear. Not for vehicles from model year 2004. Not for models built after 2004. VA shock absorber, check the dimensions of the fastening brackets: hole spacing 52 mm; Distance 23 mm. On front shock check measurements for the bracket: inside width 23 mm, mounting hole distance 52 mm. Only for four-wheel drive (4WD) vehicles. Only for cars with four wheel drive (4WD). VA also 8 cyl. Engine BMW part no. Dome bearing 31331091709, washer 31331116983, sleeve 31331110196, rear BMW part no. Support bearing 33521091710, support pot 33521090282, washer 33521092986, protective tube 31331137 93 2, Elastomers 33531091031. Additional OE equipment is needed on cars with EDC. Engines BMW part number: Bearing 31331091709, Washer 31331116983, Dust Cap 31331110196. Rear BMW part number: Bearing 33521091710, 33521090282, Washer 33521092986, Dustseal 31331137 932, Bumpstop 33531091031. Sports damper (included) in conjunction with standard air spring on the rear. The OE air suspension is not removed. A rear sport shock is provided and used with the air suspension. Not for vehicles with electronic damper adjustment. Not for vehicles with electronic damping adjustment. For Allen vehicles before year of manufacture. 6/92, fundamentally modified dome bearings must be used. Dome bearing 31336764947, washer 31331116983, sleeve 31331110196. For all cars built before 6/92 the use of different top bearing assembly in the front is required. BMW part number: Bearing 31336764947, Washer 31331116983, Dustseal 31331110196. Without electrical Damping force regulation, without IDS+. Damping force adjustment, without IDS+. Audi part number: shock absorber bearing 8E0512121E, spring pad 8E0512149H, stop buffer 4B0512131Q. For cars with self-leveling additional OE parts are required: Audi Part number: Bearing 8E0512121E, Springseat 8E0512149H, Bump stop 4B0512131Q. Vehicle-specific connection plug included. Model specific plug&play adapter included. Hardness adjustment only on the VA. Model specific plug&play adapter available as option. Only for vehicles with air suspension. Only for cars with air suspension. Only for vehicles with ABC chassis. Only for cars with ABC suspension. From chassis number: Turbo: 4LA83740, S: 4LA48416, V6: 4LA01526, USA Turbo: 4LA93466, USA S: 4LA6&74337, USA V6: 4LA21527. From VIN: Turbo: 4LA83740, S: 4LA48416, V6: 4LA01526, USA Turbo: 4LA93466, USA S: 4LA6&74337, USA V6: 4LA21527. Only for multi-link rear axle. Only for Multilink rear suspension. Only for torsion beam rear axle. Only for twist-beam rear suspension. For vehicles with an individual operating license (EBE), an acceptance test in accordance with §21 StvZo (individual acceptance) is required. Sets without available as export items. For cars with a single operating permit (EBE) an approval regarding §21 StvZo is required. Sets without can be ordered for export market. In preparation, please inquire. In development, please call. Notes in brackets only apply to complete chassis. Remarks in brackets only for kits. We reserve the right to make technical changes. We assume no liability for printing errors. Subject to possible technical revisions. Reserves the right to change product specifications. We do not assume liability for misprinting. I ask for your understanding! If you have any questions, we will be happy to help you. Monday to Thursday: 8 a. M Friday: 8 a. The free setting tool. List your items quickly and conveniently and manage your active offers. Engines BMW part number: Bearing 3133109170.
Coilover, Factory Vogtland BMW 1er F20, F21 (1K2,1K4) 2WD 968710
post

Vogtland lowering spring kit 951600 fits BMW 1Er, F20 / F21

Vogtland lowering spring kit 951600 fits BMW 1Er, F20 / F21

Vogtland lowering spring kit 951600 fits BMW 1Er, F20 / F21
Vogtland lowering spring kit 951600 fits BMW 1Er, F20 / F21. VOGTLAND sport springs, manufactured in Germany, provide multifaceted improvements for your vehicles suspension. The comprehensive design generates a better overall appearance while making a significant improvement in performance. The compound spring rate allows for comfortable ride quality under normal driving conditions while providing maximum performance when being pushed to the limit. Drop front: 35mm Drop rear: 35mm Front axle load: Rear axle load: Vogtland product code: 951600 HSN TSN: 0005/BMG, 0005/BLQ, 0005/BIG, 0005/BLF, 0005/BKX, 0005/BGK, 0005/BGL, 0005/BLG, 0005/BLN, 0005/BGM, 0005/BGN, 0005/BLH, 0005/BGP, 0005/BLI, 0005/BGO, 0005/BLJ, 0005/BLK, 0005/BGQ, 0005/BLM, 0005/BIH, 0005/BIF, 0005/BLO, 0005/BLP, 0005/BIE 1 – The measure of the lowering will be reduced by the measure of the original sport suspension. 21 – All wheel/tire combinations are allowed which are released by the wheel type testing institution. The conditions in the wheel approval have to be kept, except when original suspension is required. 1er, F20 / F21. BMW 1 F20 / F21, Typ 1K2, 1K4. VOGTLAND compound Spring Rate As the distance of spring travel reduces, the performance demands of a spring drastically increase. Derived from racing, the VOGTLAND compound spring consists of two different spring rates. The initial rate provides the proper preload necessary for proper suspension function during all road conditions, and the final rate is designed to provide the appropriate vehicle balance for neutral steering characteristics. Each spring is calibrated for every specific car model, and provides a balance between performance and comfort.
Vogtland lowering spring kit 951600 fits BMW 1Er, F20 / F21
post

Vogtland 968146 20-45/20-45 Coil Over Suspension for BMW 7

Vogtland 968146 20-45/20-45 Coil Over Suspension for BMW 7
Vogtland 968146 20-45/20-45 Coil Over Suspension for BMW 7
Vogtland 968146 20-45/20-45 Coil Over Suspension for BMW 7

Vogtland 968146 20-45/20-45 Coil Over Suspension for BMW 7
Vogtland 968146 20-45/20-45 Coil Over Suspension for BMW 7. WG Motorparts is built on our passion for cars. We supply aftermarket car parts for all makes and models of vehicles. Our network of over 50 global manufacturers means that we can get the parts you need, when you need them. And because we deliver worldwide we can send those parts anywhere, direct to your door. So if you need a specific part or a custom package that isn’t listed on our website yet, get in touch and we’ll do all the work. Ordered the wrong product? Get in contact with one of our knowledgeable support representatives today. Please be aware that some of our items are made to order and can carry extended lead times. Upon receipt of your order please check the package and contents. Why customer love us? “Item arrived quickly, no issues, will trade againfor sure”. “Happy, good postagedeal with anytime”. Would deal with again.
Vogtland 968146 20-45/20-45 Coil Over Suspension for BMW 7
post

Vogtland 951078 40/25 Sport Lowering Springs for BMW 5 E60

Vogtland 951078 40/25 Sport Lowering Springs for BMW 5 E60
Vogtland 951078 40/25 Sport Lowering Springs for BMW 5 E60
Vogtland 951078 40/25 Sport Lowering Springs for BMW 5 E60
Vogtland 951078 40/25 Sport Lowering Springs for BMW 5 E60
Vogtland 951078 40/25 Sport Lowering Springs for BMW 5 E60

Vogtland 951078 40/25 Sport Lowering Springs for BMW 5 E60
Vogtland 951078 40/25 Sport Lowering Springs for BMW 5 E60. Product Type: Vogtland 40/25mm High-tensile Lowering Springs/Sport Lowering Springs for BMW 5 E60, 560L, Sedan, 545i, 530d, 535d 07.2003- EAN/GTIN: 4251244601560 Axle Weights (kg) Front/Rear: 1070 kg/1400 kg Product Notes: 1, 2, 15, 21 Approval Certificate: 52TG0609-00 Front Spring Part Number: 951078VA Rear Spring Part Number: 951079HA Item Weight (kg): 10.5. WG Motorparts is built on our passion for cars. We supply aftermarket car parts for all makes and models of vehicles. Our network of over 50 global manufacturers means that we can get the parts you need, when you need them. And because we deliver worldwide we can send those parts anywhere, direct to your door. So if you need a specific part or a custom package that isn’t listed on our website yet, get in touch and we’ll do all the work. Ordered the wrong product? Get in contact with one of our knowledgeable support representatives today. Please be aware that some of our items are made to order and can carry extended lead times. Upon receipt of your order please check the package and contents. Why customer love us? “Item arrived quickly, no issues, will trade againfor sure”. “Happy, good postagedeal with anytime”. Would deal with again.
Vogtland 951078 40/25 Sport Lowering Springs for BMW 5 E60
post

Vogtland 25mm Front And Rear Sport Lowering Springs For BMW F20 F21 M135i M140i

Vogtland 25mm Front And Rear Sport Lowering Springs For BMW F20 F21 M135i M140i

Vogtland 25mm Front And Rear Sport Lowering Springs For BMW F20 F21 M135i M140i
Vogtland 25mm Front And Rear Sport Lowering Springs For BMW F20 F21 M135i M140i. These Lowering Springs from Vogtland are one of the most cost effective upgrades you can make to your vehicle’s suspension. Utilising manufacturing techniques like oil tempered steel, cold-coiling and materials like high tensile strength chromesilicon you know there’s some serious engineering know-how and quality going into every spring. Vogtland reckon their springs should be corrosion resistant and sag free for years to come. As with any German suspension company you can also rely on the extremely stringent TUV certification process to ensure quality. Every spring set is carefully tuned for the specific application. A mixture of linear and progressive rate springs are used according to the specific requirements of the chassis. Spring rates are carefully calibrated for the engine and spec of the car they have been listed for. Unless otherwise stated in the fitting notes, all spring kits have been designed to work with standard shocks. PLEASE NOTE: Picture Is For Illustration Purposes Only. Demon Tweeks was established in 1971 to service the needs of the motorsport competitor and our principals of offering top products, quality, service and rapid availability are as important to us today as they were in the very beginning. We are leaders in the supply of race wear, competition and road tuning parts for cars and bikes. Within a staff totalling over 140 is a dedicated sales team servicing upwards of 3000 telephone, fax and online enquiries received every day from the UK and the rest of the world. Our impressive 140,000 sq. LIQUIDS & PRESSURISED GOODS: Unfortunately we are restricted by our carriers from sending any liquids or pressurised containers outside MAINLAND UK. OVERSEAS DELIVERIES: We can send items anywhere in the world! Pay with a credit/debit card or cash and collect in person from our HQ in Wrexham, North Wales (ask for details before coming in). Finance options also available subject to status (minimum spend required), call for details. We work hard to bring you the most competitive pricing available and we wont stop there. If you have seen the same product elsewhere for less, let us know and well endeavour to match the price. Printed evidence of offer may be required; our staff will verify the offer. The competitor’s price must be available to all customers and exclude any personal discounts. We will only price match on like for like purchasing routes i. This price promise cannot be used in conjunction with any offer or discount. This price promise is undertaken in good faith and within the bounds of the law; it can be withdrawn at any time without notice. Final decision on the validity of a price promise request will rest with Demon Tweeks. For the sizing guide. Oil, Fluid & Liquid Shop. Demon Tweeks, 75 Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 9UG, United Kingdom. GB 840 2501 70. The item “Vogtland 25mm Front And Rear Sport Lowering Springs For BMW F20 F21 M135i M140i” is in sale since Monday, November 18, 2019. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Suspension\Lowering Springs & Kits”. The seller is “demontweeksdirect” and is located in Wrexham. This item can be shipped worldwide.
  • Manufacturer: Vogtland
  • Brand: Vogtland
  • MPN: 951626
  • EAN: 4251244601010
  • Manufacturer Part Number: 951626

Vogtland 25mm Front And Rear Sport Lowering Springs For BMW F20 F21 M135i M140i