Eibach sport spring kit for BMW 3 E10-20-031-15-22 Lowering kit

Posted on August 6, 2024 by admin

Eibach Pro Kit lowering springs. Front axle load: –>1010kg kg Rear axle load: –>1300kg kg Eibach product code: E10-20-031-15-22 Notes: 18 – Without levelling control. World’s leading Performance Suspension Spring System. Engineered and tested to work perfectly with stock dampers. First step towards a complete sport suspension system. Lower center of gravity. Lowering = Traction + Attraction. Lowering in mm (FA/RA). > 1010Kg/ -> 1300kg.

BMW 1 SERIES 3-DOOR E81 2007-2011 PROSPORT 35mm LOWERING SPRING KIT

Posted on August 5, 2024 by admin

Here is everything you need to know about these. Prosport 35mm Lowering Springs: 1 Series 3-door E81. Made from silicon-chrome steel to ensure long life. Red powder coat finish on the springs. Progressively wound springs for the best balance between firmness and comfort. Improved roadholding and more controlled body roll. 116i / 118i / 118d / 120i / 120d / 123d / 125i / 130i. Will fit M-Sport models or cars fitted with M-Technic or Sport Suspension – the lowering amount may be less than shown below as these models are already lowered in their standard specification. These Prosport Lowering Springs are designed to fit on to the standard (OEM) top mounts and/or spring seats. Not suitable for cars with self-levelling system or electronic damper control. Designed and tested for an exact fit and consistent performance. Every spring is performance-tested and measured at the factory before dispatch. TUV Quality Certificate Number: BM046. Prosport is a UK-based company, run by its owners, who are undeniably car enthusiasts with a long track record in the automotive tuning business. Every Prosport product is manufactured to the same exacting standards, under the stringent requirements of TUV quality control, with the result that you can be sure your Prosport product is reliable and safe. We are particularly proud of the reliability rate of Prosport products, which we fully expect to give you great service in the long run. Finally, you can be sure that should you ever need any replacement parts, we will always try to help. There’s nothing worse than being told “no, we only sell complete kits” even though you only need one item. Front Progressively wound Prosport Lowering Springs x2. Rear Progressively wound Prosport Lowering Springs x2.

BMW 2 SERIES COUPE F22 2014-2021 PROSPORT 35mm LOWERING SPRING KIT

Posted on July 11, 2024 by admin

Here is everything you need to know about these. Prosport 35mm Lowering Springs: 2 Series Coupe F22. Made from silicon-chrome steel to ensure long life. Red powder coat finish on the springs. Progressively wound springs for the best balance between firmness and comfort. Improved roadholding and more controlled body roll. 228i / 230i / 218d / 220d / 225d. Also suitable for Facelift versions. Not for xDrive version. These Prosport Lowering Springs are designed to fit on to the standard (OEM) top mounts and/or spring seats. Will fit M-Sport models or cars fitted with M-Technic or Sport Suspension – the lowering amount may be less than shown below as these models are already lowered in their standard specification. Designed and tested for an exact fit and consistent performance. Every spring is performance-tested and measured at the factory before dispatch. TUV Quality Certificate Number: BM050. Prosport is a UK-based company, run by its owners, who are undeniably car enthusiasts with a long track record in the automotive tuning business. Every Prosport product is manufactured to the same exacting standards, under the stringent requirements of TUV quality control, with the result that you can be sure your Prosport product is reliable and safe. We are particularly proud of the reliability rate of Prosport products, which we fully expect to give you great service in the long run. Finally, you can be sure that should you ever need any replacement parts, we will always try to help. There’s nothing worse than being told “no, we only sell complete kits” even though you only need one item. 2 x Progressively wound Prosport Front Lowering Springs. 2 x Progressively wound Prosport Rear Lowering Springs.

Bmw F850gs Sport 2018 Rear Spring Strut Zf Shock Absorber 3354.8565126 M8-22

Posted on March 16, 2024 by admin

BMW F850GS SPORT 2018 REAR SPRING STRUT ZF SHOCK ABSORBER 3354.8565126 M8-22. MODEL: F 8500 GS SPORT. ENGINE SIZE: 0.9 95HP 70kW. ENGINE CODE: A24A08A 8559820. MILEAGE: 3500 K MILES. REAR SPRING STRUT ZF SHOCK ABSORBER. DESCRIPTION: ITEM IS FROM USED MOTO IN GOOD CONDITION AS SEEN IN PHOTOS. OUR COMPANY HAVE WAREHOUSE IN UK AND EAST EUROPE. PLEASE READ ALL DESCRIPTION BEFORE PURCHASING AN ITEM!!! (PLEASE SEE PHOTO FOR CONDITION). PARTS SHOWN IN PICTURE IS WHAT YOU WILL RECEIVE! PART CONDITION IS USED AND WILL SHOW SOME SIGNS OF WEAR! (IF PART HAS ANY DAMAGE WHEN REMOVED WE WILL CONTACT YOU FIRST TO SEE IF YOU ARE HAPPY TO RECEIVE IN SUCH CONDITION) PLEASE ASK FOR MORE DETAILS THIS PART IS GENUINE AND IN GOOD WORKING ORDER. EVERY PART TAKEN OUT OF THE VEHICLE HAS BEEN TESTED. All parts will be delivered by post or courier. Our company have warehouse in UK and Europe. Some parts might be sent from different location other then shown in listing. WE WILL PROVIDE AS MUCH INFORMATION AS WE CAN ABOUT THE ITEM AND THE VEHICLE THAT IT WAS REMOVED FROM HOWEVER IT IS BUYERS RESPONSIBILITY TO MAKE SURE THAT ORDERED PART WILL FIT THEIR VEHICLE. Guarantee: We do everything to ensure that your products arrive safe and sound and in full working order! Thank you for shopping.

New Air Spring Suspension For Bmw X5 E70 M57 D30 N57 D30 A N63 B44 A Maxgear

Posted on December 2, 2023 by admin

Reference Numbers MAXGEAR 11-0568 E70 F15 F85 E71 E72 F16 F86 M57 D30 306D3 N57 D30 A N63 B44 A N55 B30 A N57 D30 B N52 B30 BF N52 B30 A N52 B30 AF N62 B48 B M57 D30 306D5 B47 D20 B N20 B20 A N47 D20 D N63 B44 B N54 B30 A BILSTEIN 40-221595 BMW 37 12 6 790 081 37 12 6 790 082 A178352A 3712 6 790 081 6 790 078 6 790 079 A178352A 6 790 080 6 790 082 37 12 6 790 078 37 12 6 790 079 37 12 6 790 080 TTC 08.30.049.

Air Spring Suspension For Bmw X5/e70/sav/f15/f85 X6/e71/e72/sac/f16/f86 C 3.0l

Posted on November 28, 2023 by admin

BMW X6 SAC (F16, F86) xDrive 40 d 2014-12 2019-07 2993. BMW X6 SAC (F16, F86) xDrive 50 i 2014-08 2019-07 4395. BMW X6 SAC (F16, F86) M 50 d 2014-08 2019-07 2993. BMW X6 SAC (F16, F86) xDrive 30 d 2014-08 2019-07 2993.

Maxgear 11-0567 Air Spring, Suspension Rear Axle Right For Bmw

Posted on October 19, 2023 by admin

37 12 1 095 580. 37 12 6 750 356. Spring Type : for pneumatic suspension vehicles, Suspension : for vehicles with standard suspension, Vehicle Equipment : for vehicles with leveling control. Suspension : for vehicles with standard suspension, Vehicle Equipment : for vehicles with leveling control.

Vogtland lowering spring kit 951600 fits BMW 1Er, F20 / F21

Posted on October 11, 2023 by admin

Vogtland lowering spring kit 951600 fits BMW 1Er, F20 / F21. VOGTLAND sport springs, manufactured in Germany, provide multifaceted improvements for your vehicles suspension. The comprehensive design generates a better overall appearance while making a significant improvement in performance. The compound spring rate allows for comfortable ride quality under normal driving conditions while providing maximum performance when being pushed to the limit. Drop front: 35mm Drop rear: 35mm Front axle load: Rear axle load: Vogtland product code: 951600 HSN TSN: 0005/BMG, 0005/BLQ, 0005/BIG, 0005/BLF, 0005/BKX, 0005/BGK, 0005/BGL, 0005/BLG, 0005/BLN, 0005/BGM, 0005/BGN, 0005/BLH, 0005/BGP, 0005/BLI, 0005/BGO, 0005/BLJ, 0005/BLK, 0005/BGQ, 0005/BLM, 0005/BIH, 0005/BIF, 0005/BLO, 0005/BLP, 0005/BIE 1 – The measure of the lowering will be reduced by the measure of the original sport suspension. 21 – All wheel/tire combinations are allowed which are released by the wheel type testing institution. The conditions in the wheel approval have to be kept, except when original suspension is required. 1er, F20 / F21. BMW 1 F20 / F21, Typ 1K2, 1K4. VOGTLAND compound Spring Rate As the distance of spring travel reduces, the performance demands of a spring drastically increase. Derived from racing, the VOGTLAND compound spring consists of two different spring rates. The initial rate provides the proper preload necessary for proper suspension function during all road conditions, and the final rate is designed to provide the appropriate vehicle balance for neutral steering characteristics. Each spring is calibrated for every specific car model, and provides a balance between performance and comfort.

2021 BMW X5 XDRIVE 30D M SPORT MHEV 37106869038 Air spring strut, rear right

Posted on September 28, 2023 by admin

2021 BMW X5 3.0L Unknown RR Strut. B57D30O2 (B57D30B) 6D RDE2 MHE. XDRIVE 30D M SPORT MHEV. This part is still on the vehicle and has a removal time of up to 3 days. Crash data may need to be wiped from the ECU prior to installation also. Engines / Gear boxes. “ENGINE” refers to the cylinder head and block and the internal components that make these up i. Pistons, valves, cam shaft etc. Any ancillaries left on the engine e. Water pump, cam belt (we require proof that a new timing \ cam belt \ chain has been fitted, emailed photograph of receipt or photograph of new belts fitted) are given free of charge and are not covered by this guarantee. Gaskets and oil seals are not covered. This guarantee covers the parts only. It does not cover any incurred labour charges or from any fault arising from the fitting of this part. This guarantee is void if any part supplied has been tampered with in any way i. Seals broken, dismantled etc. This guarantee does not affect your statutory rights. DSG type gear boxes will require to be programmed to your vehicle to be installed correctly, This must be performed by a qualified technician using the appropriate tools and equipment. Both engines and gear boxes will arrive to you fully drained, and without ancillaries unless specified otherwise. Our warranties do not cover failure due to abuse, misuse, improper repairs or maintenance, installation, alteration, or modifications. The warranties does not cover cost of installation, removal, normal wear and tear, and consequential or subsequent damages. Please quote reference number 0000190373 to the sales team for any queries on this item. As this is a used item it may exhibit minor scratches, bumps, dents, paint damage or general wear and tear. We do not use stock / library images, this item will be supplied as pictured (unless otherwise stated in the item description). We would be more than happy to check our stock for any items you may require. This part will also fit the following vehicles. VAT invoices will be provided upon request. Cash payments are only accepted if you are coming to collect the item. We strive to supply our clients with best Quality used car parts, by picking and packing them as safe as possible before every dispatch. Please check your item for any visual damage when delivered. Overton Aberdeen: 09:00am – 18:00pm (Mo-Fr), and 08:00am – 13:00pm (Saturdays). Overton Essex: 09:00am – 17:00pm (Mo-Fr), This site does not offer weekend collections. Scottish Highlands includes postcodes: FK17-99, G83, IV30-39, IV52-54, IV63, KW1-14, PA21-40, PH15-26, PH30-41, PH49-50. Scottish Islands includes postcodes: HS1-9, IV40-51, IV55-56, KA27, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3. This guarantee covers parts only. It does not cover any labour/garage charges or any fault arising from the fitting of our part. All our items are security marked. This is also affects any tampered, dismantled and incomplete parts. When you visit us, you’ll find a modern, IT equipped warehouse operating system where all car parts are handled by experienced staff. Overton has a recognised reputation for both quality and service and believes itself to become the market leader in vehicle recycling industry known from our base in Scotland throughout the UK and Global markets. Our team is proud to be a member of the VRA. (Vehicle Recyclers Association) and BVSF (British Vehicle Salvage Federation). Our ability to process over 3000 vehicles a year, providing reasonable priced green parts. If you do not find what you are looking here, just ask for quote from the internal engine parts to the exterior car body parts and everything in between. Wide choice of more than 47,000 tested parts available in stock now is growing daily. To protect the environment & combat crime, it is a legal requirement for all vehicle & metal recyclers (& salvage agents) to be licensed by Government. For your piece of mind, we provide our licence details here: Environment Agency Environmental Permit SNO/038904, Waste Disposal Licence 1992/15, VRAC Certification Number 2020-069. Monday – Friday 09:00am-18:00pm. Saturday – 08:00am-13:00pm. Monday – Friday 09:00am-17:00pm. For any bank holiday opening hours please message us to avoid any problems. Template by Auto PARTnered Solutions.

H&R sport spring kit 28635-8 for BMW 2er Active Tourer (U06) X1 20d+

Posted on September 26, 2023 by admin

H&R sport spring kit 28635-8 for BMW 2er Active Tourer (U06) X1 20d+. The springs are compatible with both standard and retrofit dampers and are available with ABE or parts certificate. Lowering in mm (FA/RA). 2er Active Tourer (U06). Typ U2AT nur/only 223d xDrive/4WD incl. M Sportfahrwerk / incl. Typ U1X (U11) nur/only 20d xDrive/4WD + 23d xDrive/4WD incl. Notes: Please note additional information and vehicle-specific technical notes! Vehicles fitted with BMW M-Technic MB-Sportsline Audi Sportsuspension etc. Will show less lowering as they are already factory lowered. With and without adaptive suspension. Except bad road suspension. H&R Sport Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Lowered center of gravity. Linear or progressive spring design. Compatible with OE and aftermarket shock absorbers. Powder coated for anhanced appearance and corrosion resistance. Delivered with ABE or TUV approval. Engineered, manufactured and tested in Germany. The secret to such success? To put it simply, the technology H&R employs to develop cutting-edge suspension systems for competition use is the very same used to develop innovative suspension components for street-driven cars. For the eighth year straight, H&R has been named the supplier for the DTM teams of Mercedes. In addition, H&R maintains extensive involvement in several touring car, GT and Monoposto racing series, not to mention the Formula 1- where each circuit may have its own demanding characteristics. In the harsh environs of competition, H&R is able to test new materials and innovate production technologies that can help racing teams adapt to changing road conditions accurately and efficiently. Clearly, H&R holds an advantage when it comes to developing competition suspension components, and it is this same flexibility and attention to detail that allows H&R to design and manufacture components like springs, shock absorbers and height-adjustable coil-overs for high-performance street use. For example, Porsche equips its ultra high-performance Carrera GT as well as its 996 & 997 GT II and GT III with H&R components, while Volkswagen uses them on the Golf R32, the fastest Golf ever. And recently, Mercedes Benz chose H&R suspension components for its CLK supercar, the CLK DTM AMG. Directly derived from Mercedes’ DTM race car, this special model is limited to a production run of 100 units, and with 580-bhp, is one of the fastest production street cars in the world. All of H&R’s products are 100% made in Germany, and meet ISO 9001 Quality Assurance Standards as well as the rigid safety standards of the German TUV. In addition to the finest-quality materials and state-of-the-art manufacturing techniques, H&R prides itself in its ability to remain flexible in product development and production. Whether in motorsport competition or OE manufacturing, flexibility is key to fulfilling the many requirements of the industry today. H&R employs about 100 highly-motivated and uniquely qualified individuals who design, develop, produce and sell suspension components for H&R customers around the world.

Bmw Rear Sport

Tag Archives: spring