post

BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A

BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A
BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A
BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A
BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A
BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A
BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A
BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A
BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A

BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A
Please read the listing carefully and make sure you are ordering the correct part for your car. Purchasing this product shows that you have read and accept the terms stated above. BMW 130i M Sport E81/E87 Rear Silencer Delete. Supplied with Twin 3? Slash Cut Staggered Tailpipe (Bevelled Edge) (See photos). To Fit: BMW 130i M Sport E81/E87 258bhp / 265bhp. Year: 2006 to 2012. Fits 130i E81/E87 models only. Does not fit diesel models. This is our BMW 130i M Sport E81/E87 rear silencer delete designed to fit the standard factory oe exhaust system on BMW 130i M Sport E81/E87 models that were produced from 2006 to 2012. This part has been designed and manufactured by ourselves to enhance the sound of your BMW 130i M Sport E81/E87 and give the exhaust a note that will not disappoint. You will also gain a small performance advantage when fitting this part on your car. Designed for easy DIY fitment, you will simply need to replace the standard restrictive silencer with our BMW 130i M Sport E81/E87 Rear Silencer Delete as instructed below. Fits the standard factory oe exhaust only. It WILL NOT fit any aftermarket or performance exhaust. Please check your exhaust carefully for compatibility before purchasing. Only fits the vehicle listed. It will NOT fit any other vehicles. Clamp on fitment, so no welding required. Supplied with clamps required for fitting. Premium quality 304 grade stainless steel. Fitting is available if required. Hand made to order, so please allow up to 48 hours for dispatch (excluding weekends). You will need to cut the standard exhaust and as such we recommend using a power saw for easy access and to improve accuracy. As shown in the photos, cut the standard exhaust 8? Away from the exhaust hanger bracket. Once you have removed the silencer you will then need to clamp our pipe into position. You will also need to use exhaust assembly paste when fitting this part. These are designed for easy DIY fitment, however if you have any doubts about fitting this part yourself then we recommend professional fitment. This is a genuine Zaustworx part. Designed, developed and manufactured by ourselves on our own premises in the UK. We only use high quality UK sourced 304 grade stainless steel. We have 25+ years experience in the exhaust industry. All products designed and manufactured by ourselves in the UK. We have 30+ years experience in the industry. Courier prices stated are normally for weights up to 20kg. Please ensure that someone is present to take receipt of the goods at the address given. DO NOT start a return or dispute without contacting us first, most problems can be very easily rectified. This damages our account and is the incorrect return reason, “ordered by mistake” or “changed mind” is the correct return reason and will not damage our account. We read all comments and use your views and feedback on the product and our service as a vital method of continuous improvement. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Other Exhaust & Emission Parts”. The seller is “zaustworx” and is located in this country: GB.
  • Country/Region of Manufacture: United Kingdom
  • Brand: Zaustworx

BMW 130i M Sport E81/E87 Rear Silencer Delete Twin 3 Tailpipe A
post

Prowler Sport BMW 1Series 120D E87 Rear Silencer Exhaust Stainless Steel

Prowler Sport BMW 1Series 120D E87 Rear Silencer Exhaust Stainless Steel
Prowler Sport BMW 1Series 120D E87 Rear Silencer Exhaust Stainless Steel

Prowler Sport BMW 1Series 120D E87 Rear Silencer Exhaust Stainless Steel
IX BME8701OB 100% Steel Sport Exhaust Back Box. 100% Inox Sport Exhaust BMW 1 SERIES E87 120D 2004- 120x80mm Oblique. 100% Stainless steel. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “za2510″ and is located in this country: GB. This item can be shipped to United Kingdom.
  • Brand: prowler
  • Manufacturer Part Number: IX BME8701OB
  • Country/Region of Manufacture: Italy
  • Placement on Vehicle: Underside of Vehicle – Replaces Exhaust parts

Prowler Sport BMW 1Series 120D E87 Rear Silencer Exhaust Stainless Steel
post

Cobra Sport BMW 318D 320D E90 E91 Rear Silencer Twin Exit Exhaust Back Box BM66

Cobra Sport BMW 318D 320D E90 E91 Rear Silencer Twin Exit Exhaust Back Box BM66

Cobra Sport BMW 318D 320D E90 E91 Rear Silencer Twin Exit Exhaust Back Box BM66
Price Shown is at least 10% off the RRP. MODEL 318D/320D Diesel(E90) Saloon. YEAR 2005 to 2011. PART DESCRIPTION Twin Exit Rear Box (Fits all Bumpers). BORE SIZE 2¼/57.15mm. TAIL PIPE OPTIONS – (some options incur additional cost, these are shown in brackets). If no option is requested, we will send the most suited and popular version for your vehicle, which is usually the tip shown in the main image. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These BMW 320D performance exhausts are made in 2.5/63.5mm pipework and fit from the centre section backwards replacing the rear section. Tailpipes – YTP10L – Twin 3 (76.19mm). All relevant fittings and gaskets are supplied. This performance exhaust will fit both the SE and M Sport bumpers. Note – The original pipework will have to be cut to enable this exhaust to fit the vehicle. Please note – Some systems will be made to order, please allow time for your system to be made. Found this system cheaper elsewhere? Mandrel bends for optimum flow. Remapping is recommended when purchasing / fitting a hi-flow sports cat or decat pipe. Sports cats and decats may cause EML light to illuminate. A remap or lambda cheater may be required to stop EML light coming on when fitting sport cats/decats. Decat pipes are for off road use only and will not pass an MOT emissions test. Sport cat systems will pass an MOT emissions test. How are your exhausts made? All of our exhausts are made from aircraft grade 304 stainless steel and constructed using precision TIG welding with mandrel formed bends in the pipe work for a smoother gas flow. We pride ourselves in producing high quality products. What sound can I expect from your exhausts? Our exhausts will have a more sporty tone than original equipment exhausts. This is an inevitable result of the less restrictive systems we produce. However, with careful design and production methods, we aim to keep a subtle sporty tone. If you prefer a loud system, then one of our non-resonated (no centre box) exhaust systems will provide a louder exhaust note. Many of our products feature a movie of the exhaust and give some idea as to the sound which you can expect. What power gains can I expect to achieve? Of course this varies from engine to engine, our systems are designed and manufactured to maximize gas flow with increased diameter pipe work, free flowing silencers and mandrel bends which provide a much less restrictive exhaust system than original equipment exhausts, resulting in a much better engine response and increased BHP. Typically you can expect to achieve around a 10% increase from the installation of a cat-back system. Some individual products also show approximate power gains. Is it legal to put a de-cat pipe on my car? You can only de-cat your car if it was registered prior to 1992, otherwise it will fail the emissions check at your MOT station. Will my car need remapping? If you are fitting a cat back system to your car, this will have no effect on the engine management operations. However, if you are replacing your original system with a de-cat, sports cat or front pipe your car may need remapping as it may cause the vehicles engine management light to activate. What is the difference between resonated and non-resonated systems? Resonators are box chambers incorporated into the exhaust system, which are used to make the exhaust quieter, by cancelling certain sound frequencies. A non-resonated exhaust system will therefore, give a louder exhaust note and a resonated exhaust system, a quieter exhaust note. Either option will still provide extra performance. What is a Slash-Cut tailpipe? Slash-cut tailpipes are finished and cut off at a 15 degree angle, and suit certain types of vehicles depending upon the shape of the bumper and overall aesthetics of the vehicle. If you require any advice on which tailpipe would be most appropriate for your car, please give us a call. What will be the finish of my exhaust? All our exhausts come with highly polished mirror finish tailpipes and rear boxes. All other pipework and gaskets etc, will be a matt polished finish. How do I keep my exhaust looking like new? If you do not clean your exhaust/tailpipe, it will eventually become discoloured and be more difficult to bring back to its original finish. Regular cleaning with a non-abrasive metal polish such as Solvol Autosol® will ensure that your exhaust continues to look as new. As a company we are committed to continuous improvement and investing in new developments, with a keen focus on quality and service our loyal highly trained team are always happy to help. The production facilities at Cobra Sport exhausts enables us to produce exhausts in high volume and having worked with clients such as Subaru UK, Isuzu UK and Ginetta Cars to name but a few. We are dedicated to ensuring the highest possible quality service to our customers. Excluding These Postcodes / areas. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW3, KW5-KW17, PA20-PA39, PA40-PA49, PA60-PA78, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Guernsey, Jersey, Isle of Wight, Isle of Man. (UK Islands and Highlands). Cobra Sport Exhausts are generally made to order. Special order items and/or made to order items are not always returnable. Made with love by. The item “Cobra Sport BMW 318D 320D E90 E91 Rear Silencer Twin Exit Exhaust Back Box BM66″ is in sale since Wednesday, June 7, 2017. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “amdessex” and is located in Grays. This item can be shipped to all countries in Europe, Japan, Australia, Antigua and barbuda, United States, Bahrain, Canada, Brazil, New Zealand, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Guadeloupe, Grenada, French guiana, Jordan, Saint kitts and nevis, Saint lucia, Sri lanka, Macao, Maldives, Montserrat, Martinique, Nicaragua, Peru, Paraguay, Turks and caicos islands, Aruba, Saudi arabia, United arab emirates, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Trinidad and tobago, Uruguay, Viet nam.
  • Modified Item: No
  • Country/Region of Manufacture: United Kingdom
  • Interchange Part Number: BM66
  • Warranty Period: Life time against manufacturing defects
  • Grade: T304 Stainless Steel
  • Placement on Vehicle: Underside of Vehicle – Replaces Exhaust parts
  • Part Manufacturer: Cobra Sport
  • Manufacturer Part Number: BM66
  • Other Part Number: BM66
  • Brand: Cobra Sport

Cobra Sport BMW 318D 320D E90 E91 Rear Silencer Twin Exit Exhaust Back Box BM66
post

Sport Exhaust Silencer Back Box Delete Straight Pipe BMW E46

Sport Exhaust Silencer Back Box Delete Straight Pipe BMW E46
Sport Exhaust Silencer Back Box Delete Straight Pipe BMW E46
Sport Exhaust Silencer Back Box Delete Straight Pipe BMW E46

Sport Exhaust Silencer Back Box Delete Straight Pipe BMW E46
PRE SALE CUSTOMER ORDER. Diameter of the chrome tail pipes: 2x80mm. This system comes without back boxes. It comes with black colour straight pipes, as you can see on the picture. Thanks that, the system makes sport sound. Even diesel engines sounds better. Replacement piece (equivalent to the original piece). Covered with heat resistant, black-mat paint. Made of High Quality Germany aluminum – coated steel, manufactured by Thyssen Krupp. All items that we sell are brand new. This will take about two weeks to arrive to our Garage. 2 The status of your order will still be Unfulfilled before they arrive at our Garage. We will response to resolve the problems. The item “Sport Exhaust Silencer Back Box Delete Straight Pipe BMW E46″ is in sale since Tuesday, January 7, 2020. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Exhaust & Emission Systems\Mufflers & Resonators”. The seller is “promastermm1″ and is located in Newark. This item can be shipped to United Kingdom.
  • Manufacturer Part Number: Isetta 01
  • Brand: Promaster

Sport Exhaust Silencer Back Box Delete Straight Pipe BMW E46
post

Sport Exhaust Rear Silencer Muffler Back Box BMW E90 E91 E92 E93 320i 325i 330i

Sport Exhaust Rear Silencer Muffler Back Box BMW E90 E91 E92 E93 320i 325i 330i
Sport Exhaust Rear Silencer Muffler Back Box BMW E90 E91 E92 E93 320i 325i 330i
Sport Exhaust Rear Silencer Muffler Back Box BMW E90 E91 E92 E93 320i 325i 330i
Sport Exhaust Rear Silencer Muffler Back Box BMW E90 E91 E92 E93 320i 325i 330i
Sport Exhaust Rear Silencer Muffler Back Box BMW E90 E91 E92 E93 320i 325i 330i

Sport Exhaust Rear Silencer Muffler Back Box BMW E90 E91 E92 E93 320i 325i 330i
Exhaust Rear Silencer – Loud. BMW E90 E91 E92 E93 3er. Diameter of the chrome tips: 2x80mm. E90 E91 E92 E93. PLEASE CHECK WHAT TYPE OF INLET. PIPE (Connection Pipe) HAVE YOU GOT IN. YOUR CAR : SHORT or LONG. WE HAVE IN OFFER ONLY SHORT. YOU CAN SEE IT AT OUR FIRST PHOTO. You are looking at Sport Back Box. It makes nice, sport sound. Link to video below – Original Box vs Our Box. Covered with heat resistant, black-mat paint. Made of High Quality Germany aluminum – coated steel, manufactured by Thyssen Krupp. All items that we sell are brand new. For buyers from EU countries we will despatch our products from warehouse in Poland. For buyers from UK we will despatch our products from warehouse in Poland. WE CAN DELIVER PARCELS TO ALL EUROPE COUNTRIES. BUT WE DON’T POST TO INLANDS, SWITZERLAND, GREECE AND NORWAY. We will response to resolve the problems. The item “Sport Exhaust Rear Silencer Muffler Back Box BMW E90 E91 E92 E93 320i 325i 330i” is in sale since Thursday, January 9, 2020. This item is in the category “Vehicle Parts & Accessories\Car Parts\Exhausts & Exhaust Parts\Mufflers/Silencers”. The seller is “promastermm1″ and is located in Europe Union. This item can be shipped worldwide.
  • Manufacturer Part Number: 7539583
  • Reference OE/OEM Number: 7539583
  • Brand: Promaster

Sport Exhaust Rear Silencer Muffler Back Box BMW E90 E91 E92 E93 320i 325i 330i
post

Cobra BMW 318d 320d Diesel E90 E91 Exhaust Back Box Rear Silencer Twin Exit BM66

Cobra BMW 318d 320d Diesel E90 E91 Exhaust Back Box Rear Silencer Twin Exit BM66
Cobra BMW 318d 320d Diesel E90 E91 Exhaust Back Box Rear Silencer Twin Exit BM66
Cobra BMW 318d 320d Diesel E90 E91 Exhaust Back Box Rear Silencer Twin Exit BM66
Cobra BMW 318d 320d Diesel E90 E91 Exhaust Back Box Rear Silencer Twin Exit BM66
Cobra BMW 318d 320d Diesel E90 E91 Exhaust Back Box Rear Silencer Twin Exit BM66
Cobra BMW 318d 320d Diesel E90 E91 Exhaust Back Box Rear Silencer Twin Exit BM66

Cobra BMW 318d 320d Diesel E90 E91 Exhaust Back Box Rear Silencer Twin Exit BM66
BRAND NEW COBRA SPORT REAR SILENCER EXHAUST BOX TWIN EXIT. BRAND NEW COBRA SPORT REAR SILENCER EXHAUST BOX TWIN EXIT TO FIT. BMW 318D & 320D E90 & E91 (07-11). Manufacturers of Performance and Sports Stainless Steel Exhausts in Sheffield UK. All Cobra stainless steel exhaust systems are manufactured here in the UK. All Cobra Sport performance exhausts are manufactured from certified grade 304 stainless steel and TIG welded for a superior quality finish. BMW 318d / 320d Diesel E90 & E91 2WD Saloon & Estate (07-11). Rear Silencer Exhaust Box Twin Exit 3. Fits Both The SE and M Sport Bumpers. Brand New Cobra Sport Stainless Steel. Twin Exit Rear Exhaust Box. Includes Rear Silencer & Appropriate Fitting Kit. The Original Pipework Will Have To Be Cut To Enable This Exhaust To Fit The Vehicle. Some exhausts are made to order. 57.15mm / 2.25. As a company Cobra are committed to continuous improvement and investing in new developments, with a keen focus on quality and service our loyal highly trained team are always happy to help. The production facilities at Cobra Sport exhausts enables us to produce exhausts in high volume and having worked with clients such as Subaru UK, Isuzu UK and Ginetta Cars to name but a few. How are your exhausts made? All of Cobra exhausts are made from aircraft grade 304 stainless steel and constructed using precision TIG welding with mandrel formed bends in the pipe work for a smoother gas flow. Cobra pride ourselves in producing high quality products. What sound can I expect from your exhausts? Cobra exhausts will have a more sporty tone than original equipment exhausts. This is an inevitable result of the less restrictive systems they produce. However, with careful design and production methods, Cobra aim to keep a subtle sporty tone. If you prefer a loud system, then one of our non-resonated (no centre box) exhaust systems will provide a louder exhaust note. Many of Cobra products feature a movie of the exhaust and give some idea as to the sound which you can expect. What power gains can I expect to achieve? Of course this varies from engine to engine, our systems are designed and manufactured to maximize gas flow with increased diameter pipe work, free flowing silencers and mandrel bends which provide a much less restrictive exhaust system than original equipment exhausts, resulting in a much better engine response and increased BHP. Typically you can expect to achieve around a 10% increase from the installation of a cat-back system. Some individual products also show approximate power gains. Is it legal to put a de-cat pipe on my car? You can only de-cat your car if it was registered prior to 1992, otherwise it will fail the emissions check at your MOT station. Will my car need remapping? If you are fitting a cat back system to your car, this will have no effect on the engine management operations. However, if you are replacing your original system with a de-cat, sports cat or front pipe your car may need remapping as it may cause the vehicles engine management light to activate. What is the difference between resonated and non-resonated systems? Resonators are box chambers incorporated into the exhaust system, which are used to make the exhaust quieter, by cancelling certain sound frequencies. A non-resonated exhaust system will therefore, give a louder exhaust note and a resonated exhaust system, a quieter exhaust note. Either option will still provide extra performance. What is a Slash-Cut tailpipe? Slash-cut tailpipes are finished and cut off at a 15 degree angle, and suit certain types of vehicles depending upon the shape of the bumper and overall aesthetics of the vehicle. How do I keep my exhaust looking like new? If you do not clean your exhaust/tailpipe, it will eventually become discoloured and be more difficult to bring back to its original finish. Regular cleaning with a non-abrasive metal polish such as Solvol Autosol® will ensure that your exhaust continues to look as new. At Roadrunner we pride ourselves on our personal service that cannot be compared. To any of our competitors. Our highly competent sales team are always more than willing to help, whether youre unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 – AB42, AB43-AB45, AB51-AB56. FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW4, KW5-KW17, PA20-PA38, PA40-PA49. PA60-PA78, PA87 – PA88, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to. Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. The item “Cobra BMW 318d 320d Diesel E90 E91 Exhaust Back Box Rear Silencer Twin Exit BM66″ is in sale since Wednesday, September 20, 2017. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “roadrunnermotorsport” and is located in Nottingham. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: United Kingdom
  • Custom Bundle: No
  • Type: Exhaust
  • Part Manufacturer: Cobra Sport
  • Part Manufacturer Number: BM66
  • Manufacturer Part Number: BM66
  • Manufacturer: Cobra Sport
  • Make: BMW
  • Model/ Series: 318d, 320d E90 & E91 Saloon & Estate 2WD (07-11)
  • Subtype: Stainless Rear Silencer Box
  • Intended Use: Modification/ Enhancement
  • Reference OE/OEM Number: BM66
  • IMPORTANT NOTE: O.E Exhaust Has To Be Cut When Fitting
  • PIPE DIAMETER SIZE OD: 57.15mm / 2.25″
  • TAILPIPE: Twin 3″ Round
  • EC / TUV APPROVED: NO – (No Papers Supplied)
  • Non-Domestic Product: No
  • Other Part Number: BM66
  • Brand: Cobra Sport

Cobra BMW 318d 320d Diesel E90 E91 Exhaust Back Box Rear Silencer Twin Exit BM66